Panasonic CSTE12HKE - Manual (Page 4)

4
TEMP
OFF/ON
1
2
3
TIMER
ON
OFF
CANCEL
SET
MODE
POWERFUL
AIR SWING
FAN SPEED
QUIET
CLOCK
PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS
Receiver
Auto OFF/ON button
• Used when remote control is misplaced
or malfunction.
Action Mode
Press once. Auto
Press and hold until 1 beep is
heard, then release.
Cooling
Press and hold until 1 beep is
heard, then release.
Press again until 2 beeps, then
release.
Heating
Press the button to turn off.
Horizontal airfl ow
direction louver
• Manually
adjustable.
Remote
control
display
Super alleru-buster fi lter
OFF/ON
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote control display
to prevent the unit from starting / stopping improperly.
TO SET TEMPERATURE
• Selection range: 16°C ~ 30°C.
• Operating the unit within the recommended temperature could induce
energy saving.
HEAT mode : 20°C ~ 24°C.
COOL mode : 26°C ~ 28°C.
DRY mode : 1°C ~ 2°C lower than room temperature.
MODE
TO SELECT OPERATION MODE
AUTO mode - For your convenience
• Unit selects operation mode every 30 minutes according to
temperature setting, outdoor and room temperature. During operation
mode selection the power indicator blinks.
HEAT mode - To enjoy warm air
• For cold air prevention, air might not blow out immediately and power
indicator blinks when operation starts.
• Also operates in defrost mode (maximum 12 minutes) where by the
power indicator blinks. The melted frost is drained at outdoor unit and
indoor fan is stopped.
COOL mode - To enjoy cool air
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling operation.
MOVABLE PANEL
• Opens for air intake when operation starts, and closes when operation
stops. During this time, do not hold it as it may cause malfunction or
breakdown.
Air fi lters
Front panel
(movable panel)
Maximum distances: 8m
Vertical airfl ow
direction louver
• Do not adjust by
hand.
Ionizer
Do not touch
during operation.
INDICATOR
(Green)
(Orange)
(Blue)