Panasonic CUE12QKE - Manual (Page 7)

7
English
Note
ECONAVI
,
POWERFUL/
QUIET
,
AUTO
COMFORT
,
NANOE-G ECONAVI
,
POWERFUL/
QUIET
,
AUTO
COMFORT
• Can be activated in all modes and can be
cancelled by pressing the respective button
again.
• Cannot be selected at the same time.
• Cannot be activated during MILD DRY COOLING.
To set the timer
2 sets of ON and OFF timers are available
to turn ON or OFF the unit at different preset
times.
TIMER
SET
CANCEL
ON
OFF
1 2 3
AC C
CANCEL
3
AC C
2 1 3
1 Select ON or OFF
timer
Example:
OFF at 22:00
• Each time pressed:
OFF
Cancel
2 Set the time
2
3 Confi rm
SET
TIMER
• To cancel ON or OFF timer, press
ON
or
OFF
to select respective or then press
CANCEL
.
• If timer is cancelled manually or due to power
failure, you can restore the timer again by
pressing
ON
or
OFF
to select respective or
then press SET .
• The nearest timer setting will be displayed and
will activate in sequence.
• When ON Timer is set, the unit may start
earlier (up to 35 minutes) before the actual
set time in order to achieve the desired
temperature on time.
• Timer operation is based on the clock set in
the remote control and repeats daily once set.
For clock setting, please refer to Quick guide.
See “To learn more...” for details.
How to use
AUTO
COMFORT To maximise comfort
AUTO COMFORT
NANOE-G
To purify the air
NANOE-G
• nanoe-G starts automatically when the unit is
turned on with OFF/ON .
• Can be activated even when the unit is turned
off. In this condition, the unit will operate as a fan
with AUTO fan speed and louver swing.
Multi
• This operation cannot be performed or
will be stopped if other indoor unit is
activating HEAT mode.
To deactivate viruses/bacteria on the fi lter
NANOE-G POWER
• After the unit is turned off, the nanoe-G in-fi lter
deactivation may activate up to 150 minutes.
Turning on the unit cancels this operation.
• To disable this operation in the future, press and
hold
NANOE-G
until a short beep sound is heard. This
will not disable the nanoe-G to purify the air.
• To restore the nanoe-G in-fi lter deactivation, press and
hold
NANOE-G
until a long beep sound is heard.
AIR SWING
To adjust airfl ow direction
( Remote control display )
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver
swings left/right and up/down automatically.
• In HEAT mode, if AUTO is set, the horizontal
louver is fi xed at the predetermined position.
The vertical louver swings left/right after the
temperature rises.
• Do not adjust the louver by hand.