Panasonic CURE12PKE User Manual

Page 5

Advertising
background image

5

English

Safety precautions

WARNING

Power supply

If the supply cord is damaged, it must be replaced

by the manufacturer, service agent or similarly

qualified persons in order to avoid a hazard.
It is strongly recommended to be installed

with Earth Leakage Circuit Breaker (ELCB)

or Residual Current Device (RCD) to prevent

electric shock or fire.
To prevent overheating, fire or electric shock:

• Insert the power plug properly.

• Dust on the power plug should be periodically

wiped with a dry cloth.

Stop using the product if any abnormality/

failure occurs and disconnect the power plug

or turn off the power switch and breaker.

(Risk of smoke/fire/electric shock) Examples

of abnormality/failure

• The ELCB trips frequently.

• Burning smell is observed.

• Abnormal noise or vibration of the unit is observed.

• Water leaks from the indoor unit.

• Power cord or plug becomes abnormally hot.

• Fan speed cannot be controlled.

• The unit stops running immediately even if it

is switched on for operation.

• The fan does not stop even if the operation

is stopped.

Contact your local dealer immediately for

maintenance/repair.
Replacement or installation of power plugs shall

be performed by authorized/qualified personnel

only. The wires in this mains lead are coloured in

accordance with the following code:

Terminals

Red

wires

live

neutral

earth

colours (IEC Standard)

blue

green-yellow

brown

Black

Green/Yellow

Wiring colour may vary depending on a

country wiring code’s standard.

This equipment must be earthed to prevent

electrical shock or fire.

Prevent electric shock by switching off the

power supply and unplug:

- Before cleaning or servicing,

- When extended non-use, or

- During abnormally strong lightning activity.

CAUTION

Indoor unit and outdoor unit

Do not wash the indoor unit with water,

benzine, thinner or scouring powder to

avoid damage or corrosion at the unit.
Do not use for preservation of precise

equipment, food, animals, plants, artwork

or other objects. This may cause quality

deterioration, etc.
Do not use any combustible equipment

in front of the airflow outlet to avoid fire

propagation.

Do not expose plants or pet directly to airflow

to avoid injury, etc.
Do not touch the sharp aluminium

fin, sharp parts may cause injury.
Do not switch ON the indoor unit when waxing

the floor. After waxing, aerate the room

properly before operating the unit.
Do not install the unit in oily and smoky areas

to prevent damage to the unit.
Do not dismantle the unit for cleaning purpose

to avoid injury.
Do not step onto an unstable bench when

cleaning the unit to avoid injury.

Do not place a vase or water container on the

unit. Water may enter the unit and degrade the

insulation. This may cause an electric shock.

Do not open window or door for long time

during COOL/DRY mode operation.
Prevent water leakage by ensuring drainage pipe is:

- Connected properly,

- Kept clear of gutters and containers, or

- Not immersed in water

After a long period of use or use with any

combustible equipment, aerate the room

regularly.
After a long period of use, make sure the

installation rack does not deteriorate to

prevent the unit from falling down.

Remote control

Do not use rechargeable (Ni-Cd) batteries. It

may damage the remote control.
To prevent malfunction or damage of the

remote control:

• Remove the batteries if the unit is not going

to be used for a long period of time.

• New batteries of the same type must be

inserted following the polarity stated.

Power supply

Do not disconnect the plug by pulling the cord

to prevent electric shock.

F568805-en.indd 5

2012-11-7 15:20:05

Advertising
This manual is related to the following products: