Panasonic NCDF1WXE - Manual (Page 13)

13
English
3 Fill water in the water tank,
then plug in and turn on the
power switch. 4 (For NC-ZF1)
Remove the jug after light is turned
off.
(For NC-DF1)
After brewing is completed, turn off
the switch and remove the jug.
(For NC-ZF1)
The power indicator will light up while brewing •
coffee and turn it off automatically.
(For NC-DF1)
Power indicator will light while the switch is on. •
Note
Do not fill the water tank with hot water. •
(A lot of steam may spurt out.)
Do not brew coffee when the water is below 2
•
or more than the maximum 8 on the scale.
Do not add water while brewing.
•
When water is added more than you desire, •
please remove it by using another container.
To brew coffee consecutively
Repeat step 1~3.
Wait for 5 minutes to add water in the water •
tank.
( If water is added too soon, steam may spurt
out.
Press down the lever on the jug lid to pour the coffee into •
cups. (NC-ZF1 only)
Note
Do not pull out the basket when jug is set on the plate. •
(Coffee will drip.)
Coffee is hot, remove the jug slowly.
•
(Hot coffee may spill out.)
When the jug is removed immediately after brewing,
•
coffee may drip. In that case, please wait to remove the
jug for a while after brewing.
When handling the jug with hot coffee in, do not open the
•
jug lid. Hot liquid may spurt out or drop on your hand. (It
may cause burns.)
When removing the jug, pull it in line with the handle.
•
To keep the coffee warm, leave the power switch in the on •
position. (NC-DF1 only)
For a better taste, keeping the coffee warm for a long time
•
is not recommended.
 After use
Unplug the coffee maker after use. •
When you have remaining water in the water tank
Turn on the coffee maker and extract water completely •
into the jug, then throw it away.
)