Panasonic CSE9PKEA - Manual (Page 8)

8
To set the timer
Weekly timer setting
Promotes energy saving by allowing you to set
up to 6 programmes in any given day.
TIMER/CLOCK
CANCEL CLOCK
SELECT MODE
OFF/ON SET
UP
DOWN
Lights up if Timer operation is selected
Programme number in a
day (1 ~ 6)
Time to be selected
(10 minutes step)
ON Timer
OFF Timer
Day to be selected
Indicates the selected day
Indicates the next timer
operation day
1. Press TIMER
MODE
for 4 seconds to change
display to weekly timer.
2. Press TIMER
UP
or
DOWN
to select your
desired day.
3. Press
SELECT
to confi rm your selection.
4. “1” will be blinking, press SELECT to set
programme 1.
5. Press TIMER OFF/ON to select ON or OFF timer.
6. Press TIMER
UP
or
DOWN
to select your
desired time.
If you want to set the timer together with
your desired temperature, press
TEMP
to
select the temperature.
7. Press
SET
to confi rm programme 1. The
selected day will be highlighted with .
• After 2 seconds, the display will move to the
next programme. Repeat steps 4 to 7 to set
programmes 2 to 6.
• During timer setup, if no button is pressed within
30 seconds, or if the
SET
button is pressed, the
setting at that moment is confi rmed and timer
setup is ended.
To check current timer programme
1. Press TIMER
MODE
to enter timer mode and
press
SELECT
to enter day setting.
2. Press TIMER
UP
or
DOWN
until your desired day is
shown, press
SELECT
to confi rm your selection.
3. Press TIMER
UP
or
DOWN
to check the set
programmes.
To modify current timer programme or
add new timer programme
1. Press TIMER
MODE
to enter timer mode and
press
SELECT
to enter day setting.
2. Press TIMER
UP
or
DOWN
until your desired day is
shown.
3. Perform steps 4 to 7 of “Weekly timer setting”
to modify existing timer programme, or add any
timer programme.
To cancel current timer programme
1. Press
SELECT
to enter day.
2. Press TIMER
UP
or
DOWN
until your desired day is
shown, press
SELECT
to enter programme setting.
3. Press TIMER
UP
or
DOWN
until your desired day
is shown. Press
CANCEL
to cancel the programme
and will disappear.
To disable/enable Weekly Timer
• To disable weekly timer setting, press TIMER
MODE
, then press
CANCEL
.
• To enable previous weekly timer setting, press
TIMER
MODE
, then press
SET
.
Note
• Daily timer and weekly timer could not be set
at the same time.
• Same timer programme cannot be set in the
same day.
• After timer is set, the TIMER indicator at
indoor unit does not turn on, it does not
indicate malfunction.