How to clean – Panasonic NCZF1 User Manual

Page 8

Advertising
background image

14

15

English

How to Clean

 Clean the appliance after every use.

 Unplug and make sure that the appliance has coolled down before cleaning.

Note

Do not use benzine, thinner, alcohol, bleach, polishing powder, metal brush or nylon brush, otherwise the surface

will be damaged.
Do not use a dishwasher.

Do not clean the appliance with pointed object such as a toothpick or pin.

Handle the jug with care.

Do not use the jug if it is chipped or cracked.

Filter holder

Wash with diluted dish soap (neutral) and a soft sponge.

Anti drip valve

It is to prevent leakage of
the remaining drops from
the basket.

 Pour water in the filter

holder.

 Push the anti drip valve up

and shake it for 2~3 times.

Anti drip valve

Stainless steel jug

(For NC-ZF1)

Wash with diluted dish soap (neutral) and a soft
sponge.

Stainless steel jug lid

Rinse off the lid in water. Discard water inside of it
through the hole by lever after rinsing it.

To remove the jug lid

Turn the jug lid in the direction of the arrow to line
up the triangles.

To attach the jug lid

Line up the triangles and turn the jug lid in the
direction of the arrow to line up the triangle line up
with rectangle.

Glass jug

(For NC-DF1)

Wash with diluted dish soap (neutral) and a soft
sponge.

Measuring spoon

Wash with diluted dish soap (neutral) and a soft
sponge.

Clean the water tank with citric acid

when brewing is slow

The brewing speed gets slow when the mineral
such as the calcium contained in water adheres to
the water pipe and the water tank.
* Scale build-up will occur more in areas where the

water contains more minerals.

Set the basket and jug.

1

Fill the water tank with cold water up to 8 on

2

the scale and add approx. 20 g (2 tbsp) of citric
acid.
Mix well with a stick and then close the
watertank lid.

Plug in and turn on the power switch.

3

When the water tank gets empty, turn off the

4

power switch and throw hot water in the jug
away.

Repeat step 1~4 with only water to remove the

5

smell of the citric acid.

Body / Plate

Wipe with a well-wrung cloth.

To avoid damaging surfaces of the body and the
plate.

Do not hit with hard objects or rub them with

scouring pad.

Advertising
This manual is related to the following products: