Panasonic WHUD07CE5A1 - Manual (Page 4)

4
CONTROL PANEL SETTING UP THE SPECIAL FUNCTIONS
• Some functions describe in this manual may not be applicable to your unit.
• Consult your nearest authorized dealer for further information.
• For normal operation, the
ERROR
RESET
,
FORCE
and
SERVICE
buttons are not in use.
CONTROL PANEL’S DISPLAY
a Heat Mode OFF/ON Indicator j Timer/Clock Setting Display
b Tank Mode Indicator k Outdoor Ambient Temperature Display
c Quiet Mode Indicator l Water Outlet Temperature Display
d Backup Heater Enabled/Disabled Indicator m Backup Heater Actual (OFF/ON) Indicator
e Force Heater Request OFF/ON Indicator n Booster Heater Actual (OFF/ON) Indicator
f External Thermo Controller Connected Display o System Defrost Operation OFF/ON Indicator
g Operation LED p System Setting Mode OFF/ON Indicator
h Solar Display q System Status Check Mode OFF/ON Indicator
i Caution (Tank Temperature above 60°C) Indicator r System Service Mode OFF/ON Indicator
CONTROL PANEL’S BUTTON
1 OFF/ON Button 6 Timer Setting Group Buttons
2 Operation Mode Button 7 Force Heater Mode Button
3 Quiet Operation Button 8 System Service Mode Button
4 Indoor Unit Backup Heater Enabling Button 9 System Status Check Button
5 System Setting Mode Buttons 10 Error Reset Button
HEAT
TANK
QUIET
FORCE
HEATE R
OPERAT ION
BOOSTER
HEATER
ACTUAL
DEFROST
SETTING
STATUS
SERVICE
WATER OU
TLET
OFF / ON
TIMER
OUTD OOR
C
C
C
Open cover for buttons selections.
TIMER OUTDOOR
HEAT
SETTING
STATUS
SERVICE
BOOSTER
QUIET
TANK DEFROST
WATER OUTLET
C
C
SET
SELECT
CANCEL
ERROR
RESET
SETTING STATUS
SEARCH
SERVICE FORCE CLOCK
CHECK
OFF /ON
MODE
HEATER QUIET OFF/ON
TIMER
HEATER
OPERATION
FORCE
HEATER
ACTUAL
TIMER 1
MONTUEWEDTHU FRI SAT SUN
SOLAR REMOTE
2 3 4 5 6
ON
OFF
a
b
c
d
e
f
g
h i j k l
m
n
o
p
q
r
1
6
5 10 3
7
8
4
9
2
Notes:
• The current day and time need to be set when:
- The power is turned on for the fi rst time.
- After a long time has elapsed since the power was last turned on.
• The current time that has been set will be the standard time for all
the Timer operations.
1. Press
CLOCK
.
2. Press or to set current day.
3. Press
SET
to confi rm.
4. Repeat steps 2 and 3 to set the current time.
CONTROL PANEL PREPARATION
Setting Current Day and Time
F568556_YS0112-0.indb 4 F568556_YS0112-0.indb 4 16-Mar-12 11:40:46 AM 16-Mar-12 11:40:46 AM
Process Cyan Process CyanProcess Magenta Process MagentaProcess Yellow Process YellowProcess Black Process BlackPANTONE 293 C PANTONE 293 C