Audiovox Prestige P967 - Manual (Page 6)

-6-
bq
LIQUID CRYSTAL DISPLAY (LCD)
The Liquid Crystal Display (LCD) panel displays the frequency,
time, and activated functions.
NOTE: It is a characteristic of LCD panels that, if subjected to
cold temperatures for an extended period of time, t h e y
may take longer to illuminate than under normal conditions.
In addition, the visibility of the numbers on the LCD may
slightly decrease. The LCD read-out will return to normal
when the temperature increases to a normal range.
br
VOLUME/POWER LEVEL METER DISPLAY
This display consists of left and right outer bar graphs and a center
graph which provide a visual representation of the audio signal.
The signal strength is represented by the bar graphs whose
illuminated segments increase and decrease as a function of the
signal strength. As the signal increases, the number of illuminated
segments will increase and vice-versa.
bs
MODE/FUNC BUTTON
This button performs three functions: The first press selects the
disc player playback mode, provided a disc is loaded; a second
press selects the optional CD changer playback mode; and the
third press selects the radio mode. If no CD changer is installed,
the third press will return to radio operation.
bt
EQUALIZER (EQ) BUTTON
The Equalizer button applies preset sound effects to the unit's
audio output signal. The EQ button, when pressed, will activate one
of five operating modes (CLASSICS, POP, ROCK, DSP OFF or
FLAT). When the Equalizer function is active, the bass and treble
levels can be changed by pressing the Select button
3
and
rotating the volume increase/decrease control
2
. The equal-
izer function returns to the user-set bass and treble levels.
bu
PRE-SET SCAN (PS) AUTO-STORE TUNING (AS)
During radio operation, press this button momentarily to scan the
6 stations pre-set into the memories of that band. The unit will
stop at each pre-set station for 5 seconds before continuing to the
next pre-set station. During this time, the band number and pre-
set station frequency will flash. Press the button again momen-
tarily to stop Pre-Set Scan operation and remain on the se-
lected frequency. The band number and station frequency stops
flashing.
Pressing the button for longer than 2 seconds will activate the
Auto-Store Tuning feature which will automatically scan the band
and enter up to 6 strong stations into the pre-set memory posi-
tions. This will occur for all three bands. After entering the sta-
tions, the unit will automatically stop at each station for 5 seconds
so each can be heard. If you have already set the pre-set memo-
ries to your favorite stations, activating the Auto-Store feature will
erase those stations and enter the new strong stations. This fea-
ture is most useful when travelling in a new area where you are not
familiar with the local stations.
cl
DISC SLOT
With the label surface facing up, gently insert the disc into the slot
until the soft-loading mechanism engages and disc play begins.
The
indication illuminates and becomes animated, CD-IN ap-
pears. The track number and elapsed time appears on the display
panel.