Controls, Gmrs1262 operational modes – Audiovox GMRS1262 User Manual
Page 10
128-7623
10 of 28
Controls:
LED Flashlight Button (16)
Press this button on the right side of the Transceiver to light the white LED
(15) on top of the unit, thereby activating the built-in flashlight function.
Power On/Off/Keylock (13) Button
Momentarily press (about 1second) the power on/off button ( ). You will
hear a dual beep to indicate the unit is on. Press the on/off button again
for 2 seconds to turn the unit off. When the unit is on and the button is
pressed for 3 seconds, the keylock icon (
) will appear to confirm
the MODE, SCAN and channel up/down buttons have been disabled.
Adjusting the Volume (10, 11)
With the unit powered on, press the Up Channel/Volume button ( ) to
increase volume and the Down Channel/Volume button ( ) to decrease
10
GMRS1262 OPERATIONAL MODES
WEATHER BAND
WEATHER BAND
SELECT
CHANNEL
SELECT
ROGER
BEEP
BUTTON
BEEP
DUAL
WATCH
VOX LEVEL
SELECT
CALL
SELECT
POWER
SELECT
(GMRS Channels
Only)
GMRS/FRS BAND
CTCSS
SELECT
CHANNEL
SELECT
NOTE: 1. To switch between GMRS/FRS
and Weather Band modes,
press and hold the Mode/WB
button for 3 seconds. Refer to
the appropriate section of this
manual for detailed operating
instructions for each mode.
2. To enter the VOX mode, press
and hold the S/VOX button for 3
seconds.