Atlas Sound FA114 - Manual (Page 2)

Specifications subject to change without notice
© 2001 Atlas Sound Printed in U.S.A. 000501 SL1-1524
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
ARCHITECT AND ENGINEER SPECIFICATIONS
Loudspeaker system shall be Atlas Sound Strategy Series™. It shall
be UL listed and include a high-compliance, 4" loudspeaker Model
FA114, matched enclosure Model ____(FA97-4, FA97-4NK, FA95-4,
FA95-4NK) and flush grille Model ____(FA51-4, FA170-4, FA720-4,
FA730-4). Strategy Series loudspeaker, enclosures and grilles shall
be listed by Underwriters Laboratories (UL 1480 General Signaling) to
U.S. and Canadian safety standards. Nominal frequency response of
the system shall be 150 Hz to 17 kHz with a sensitivity of 94dB(peak)
measured at 1W / 1M across the full bandwidth. Power rating shall be
10 watts. Unit shall be comprised of a 4" dia. low frequency driver. Magnet shall be a minimum of 10 oz. and the voice coil diameter shall
be 1" (25mm). Dispersion shall be 135° measured at -6dB, 2kHz
Octave Band. Transformer-equipped models shall include factory wired
____ (25 / 70.7, or 100) volt transformer with primary taps of _____
(.5, 1, 2, 4 or .5, 1, 2 & 5). Loudspeaker shall front-load to specified
enclosure model FA97-4(NK) or FA95-4(NK), or Model FAPR-4 plaster
ring. Strategy Series enclosures shall use clamping dogs for ceiling
mounting and stud receivers for grille mounting. The FA97 enclosure
models shall be lined with high density acoustic batting.
FA114 : Frequency Response (Measured in FA97-4 Enclosure) FA114: Impedance
FA114 : Fundamental vs 2nd & 3rd Harmonics
(Raised 20dB)@ 1 watt (Measured in FA97-4 Enclosure)
FA114: Frequency Response Overlay at 0, 15, 30 & 45 degrees
(Measured in FA97-4 Enclosure)
Octave Bands Normalized to Zero On Axis (Measured in FA97-4 Enclosure)
FREQUENCY (Hz)
FREQUENCY (Hz)
FREQUENCY (Hz)
Dim. A
FA114T72 3.875”
FA114T100 3.875”
5”
2.25”
5”
A