Panasonic NNCT579SEPG - Manual (Page 20)

En-18
Stand Time
By using Delay/Stand Pad, you can program Stand Time after cooking is completed
or use to program the oven as a minute timer.
1h 10min
1min 10s
1h 10min
1min 10s
1h 10min
1min 10s
1h 10min
1min 10s
•
Set the desired cooking program
and cooking time.
•
Press
Delay/Stand
Pad.
•
Set desired amount of time by
pressing Time Pads (up to 9
hours 59 minutes).
•
Press Start Pad.
NOTE:
1. Three stage cooking can be programmed including Stand Time.
e.g.
2. If the oven door is opened during the Stand Time or Minute Timer, the time in the
display window will continue to count down.
3. This feature may also be used as a timer. In this case press Delay/Stand Pad, set
time and press Start Pad.
e.g.
High Power: 4 min. Stand Time: 5 min.
High Power: 2 min.
inoperable
once
once twice
inoperable
4 times
inoperable
5 times inoperable
1h 10min
1min 10s
IP2811_37X50EP_01_Eng_00_091117.18 18 IP2811_37X50EP_01_Eng_00_091117.18 18 2009-11-17 Tina15:01:56 2009-11-17 Tina15:01:56