Panasonic NNGD369MEPG - Manual (Page 8)

En-6
Control panel
NN-GD359W / NN-GD369M / NN-GD379S*
Beep sound:
When a pad is touched correctly a beep will be heard. If a pad is touched and no beep is heard,
the unit has not or cannot accept the instruction. At the end of any complete program, the oven
will beep 5 times.
(1) Display window
(2) Auto weight Microwave programs
(3) Auto weight Combination
programs
(4) Auto weight Turbo Defrost
programs
(5) Time/weight Dial
(6) Microwave power Pad
(7) Grill Pad
(8) Combination Pad
(9) Delay/Stand Pad
(10) Clock Pad
(11) Stop/Cancel Pad:
Before cooking:
One press clears your instructions.
During cooking:
One press temporarily stops the
cooking program. Another press
cancels all your instructions and the
time of day will appear in the display.
(12) Start Pad
The design of your control panel may vary
from the panel displayed (depending on
colour), but the words on the pads will be
the same.
(5)
N.B:
If an operation is set and start pad is not pressed, after 6 minutes, the oven will automatically
cancel the operation. The display will revert back to clock mode.
(1)
(2)
(3)
(4)
(6)
(7)
(8)
(9) (10)
(12) (11)
*
This oven is equipped with an energy
saving function.
Please Note:
1. When in stand-by mode the brightness
of the display will be reduced.
2. The oven will enter stand-by mode,
when first plugged in and immediately
after the last operation has completed.