Panasonic ESST25 - Manual (Page 18)

18
Problem Action
Makes a loud sound.
Apply oil.
Confirm that the blades are
properly attached.
The shaver can be loud due to
the linear motor. This does not
indicate a problem.
The driving sound
changes while shaving.
While the shaving sensor lamp
glows, the shaving sensor is
operating. The sound changes
depending on the beard thickness.
The power will not
switch to OFF.
Press the power switch twice
while using in the shaving
sensor mode.
The shaver cannot be
charged.
Push the main body into the
charging stand all the way and
make sure the charge status
lamp glows.
Gently wipe the side terminals
and the charging terminals of
the charging stand with a cloth
or tissue damped with water.
The recommended temperature
for charging is 10 – 35 °C. If
charged at a temperature other
than the recommended
temperature, the shaver may
take longer to charge or may
not charge at all.
Problem Action
Operating time is short
even after charging.
Apply oil.
When the number of operations
per charge starts to decrease,
the battery is nearing the end of
its life.
Shaver stopped
functioning.
Recommended ambient
temperature for operation is
5 – 35 °C. The shaver may stop
functioning when out of
recommended ambient
temperature range.
The battery has reached the
end of its life.
Service
Contact
Please visit Panasonic web site http://panasonic.net or contact
an authorized service center (you find its contact address in
the pan european guarantee leaflet.) if you need information
or if the shaver or the cord gets damaged.