Mpa6611x, Radio operation, Stereo – Audiovox Jensen MPA6611X User Manual

Page 10: Accessing xm, Radio mode, Displaying the identification (id) code, Selecting a station, Preset stations

Advertising
background image

MPA6611X

10

Preset Scan

Scans stations stored in the current band. Select a band (if needed). Press AS/PS (21) for less
than three seconds. The unit will pause for ten seconds at each preset station. Press AS/PS
again to stop scanning when the desired station is reached.

Stereo

The unit will automatically pick up a stereo signal, when available. When in stereo mode, the
“ST” icon (18) appears in the display. When no stereo signal is available, the unit will
automatically revert to mono operation, and no icon will be displayed.

XM

®

RADIO OPERATION

Listeners can subscribe to XM

®

Radio on the Web by visiting www.xmradio.com, or by

calling (800) 967-2346. Customers should have their Radio ID ready (see “Displaying the
Identification (ID) Code”). Customers can receive a limited number of free-to-air
channels without activation.

Accessing XM

®

Radio Mode

To switch to XM

®

Radio mode, press MODE (2) until “XM RADIO” appears on the display.

Displaying the Identification (ID) Code

Before you listen to XM

®

Radio, you must subscribe to the service using your radio’s

identification number. To display the radio ID, press the DOWN TUNING (|<<) button (11) to
access channel 000. The screen displays “RADIO ID” followed by an 8-figure ID number.

Selecting a Station

Press the UP TUNING (>>|) or DOWN TUNING (|<<) button (10 and 11) to change to another
station. Press and hold the UP TUNING (10) or DOWN TUNING (11) button for more than one
second to fast forward or fast reverse through the stations.

Preset Stations

Press B (3) to change between three XM

®

Radio bands. Each band stores up to six preset

stations. You can store and recall a total of 18 preset stations.

Store a Station
1.

Select a band (if needed), then select a station.

2.

Hold a preset button (12 – 17) for three seconds. The preset number appears in the
display.

Recall a Station
1.

Select a band (if needed).

2.

Press a preset button (12 – 17) to select the corresponding stored station.

TUNE

SEARC

H

ER

ASE

E

N

T

E

R

A

U

D

IO

MUTE

COPY

MPA6611X

CARD

READER

Press and Hold

TUNE

SEARC

H

ER

ASE

E

N

T

E

R

A

U

D

IO

MUTE

COPY

MPA6611X

CARD

READER

10

11

20

16

21

7

12 13 14 15

17

2

4

3

Advertising