Panasonic ERGK40 - Manual (Page 6)

6
English
▼ ▼
To remove light dirt For heavy dirt
5. Slide the cleaning shutter
until it clicks.
6. Slide the pop‑up trimmer
switch upwards.
7. Clean the foil frame with
running water.
8. Turn the shaver off.
• Rinse with water and
shake up and down
several times to remove
the water.
5. Turn the shaver off after
10 ‑ 20 seconds.
6. Press the foil frame release
buttons to remove the foil
frame.
7. Remove the inner blade by
grasping it firmly at both
ends and pulling straight
away from the shaver.
8. Clean the shaver, the foil
frame (including the pop‑up
trimmer) and inner blade
with running water.
▼ ▼
Clean
Cleaning the shaver
1. Remove the shaver from the AC
adaptor.
2. Close the cleaning shutter.
2
3. Apply some hand soap and some water
to the outer foil.
4. Turn the shaver on.
3-4
ER-GK40_EU.indb 6 2012/06/13 17:18:21