Auto Page RS-1000 - Manual (Page 10)

RS1000 OP 1/07 10
C- P3- 3. “COUNT DOWN TIMER” SETTING: Example: set the count down timer to 2:30
Note: When count down timer is triggered, press any button to stop the beeper.
Spin down the switch
to page 3.
Press button 3 and
the ”hours” digit flashes
for adjusting.
Press button 2 to set
the ”hours” digit to “02”.
This can also be done
with the jog shuttle. Press button 1 and
the ”minutes” digit
flashes for adjusting.
Press button 2 to set
the ”minutes” digit to
“30”. This can also be
done with the jog
shuttle. Press button 3 to start
the count down
timer and the icon
will flash on the main
page.
While the icon is
flashing push the ” ”
button to display the
count down timer.
Press button 2 to turn
OFF the count down
time.
C- P3- 4. “DAILY START TIMER” SETTING: Example set the Daily Start Timer to 05:00A. This is to
set the start time. Please refer to daily start timer operations to use the daily timer start. (Page #
19)
Spin down the switch
to page 3.
Press button 4 and
the ”hours” digit flashes
for adjusting. Press button 2 to set
the ”hours” digit to “05”.
This can also be done
with the jog shuttle. Press button 1 and
the ”minute” digit
flashes for adjusting.
This can also be done
with the jog shuttle.
Press button 2 to set
the ”minute” digit to
“00”.
Press button 3 and the
setting is done.
While the icon is
flashing push the ” ”
button to check the daily
start timer.