Asus RS100-E5-PI2 - Manual (Page 109)

ASUS RS100-E5-PI2 6-15
6. Select RAID from the Virtual Drive menu, then press <Enter>.
7. Select the RAID level from the menu, then press <Enter>.
You need at least two identical hard disk drives when creating a RAID 1 set.
8. When creating a RAID 1 set, select DWC from the Virtual Drive menu, then
press <Enter>.
When creating a RAID 0 set, proceed to step 10.
9. Select On to enable the Disk Write Cache setting, then press <Enter>.
Enabling DWC can improve the performance, but with the risk of data loss.
LSI Software RAID Configuration Utility Ver A.53 Sep 06, 2007
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
PORT #
0
1
Easy Configuration - ARRAY SELECTION MENU
Virtual Drive(s) Configured
LD RAID Size #Stripes StripSz Status
0 1 156402MB 2 64 KB ONLINE
Virtual Drive 0
RAID = 1
Size = 156402MB
DWC = Off
RA = On
Accept
SPAN = NO
Choose RAID Level For This VD
RAID Level
RAID 0
RAID 1
LSI Software RAID Configuration Utility Ver A.53 Sep 06, 2007
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
PORT #
0
1
Easy Configuration - ARRAY SELECTION MENU
Virtual Drive(s) Configured
LD RAID Size #Stripes StripSz Status
0 1 156402MB 2 64 KB ONLINE
Virtual Drive 0
RAID = 1
Size = 156402MB
DWC = Off
RA = On
Accept
SPAN = NO
Disk Write Cache Setting Of VD
Change DWC
O f f
On