Cleaning, Replacing the outer foil – Panasonic ESWD52 User Manual
Page 9
9
TR
H
R
O
SK
CZ
PL
FIN
DK
S
N
P
NL
E
I
F
D
GB
Cleaning
Always clean the frame, fast/gentle/beginner caps and discs
after use to keep them in a hygienic state.
Switch off and unplug the appliance before cleaning.
Dry cleaning
1
1. Lift the fast/gentle/
beginner caps upward
while holding the cap
release rib [
BCD
3
] or
remove the frame by
pushing the frame
release button [
G
8
].
2
2. Clean the epilation head [
E
]
and the shaver head [
G
] with
the cleaning brush [
J
].
Wet cleaning
1. Lift the fast/gentle/beginner caps upward while holding
the cap release rib [
BCD
3
] or remove the frame by
pushing the frame release button [
G
8
].
2
2. Apply liquid hand soap to the discs and the
blades.
3
3. Turn the switch on and then wet the discs and
the blades to create foam.
4
4. Wash the head with water to wash out
hair.
Do not use hot water.
If soap is not completely washed away,
then a white deposit can accumulate
and prevent the discs and the blades
from moving smoothly.
5. Turn the switch off, wipe the appliance
with a dry cloth and dry it well.
Replacing the outer foil
We recommend replacing the outer foil [
G
6
] every year and
the inner blade every two years. Remove the outer foil of the
shaver head [
G
] only when replacing it.
1. While pushing the outer foil gently with the fingers, use a
fingernail to release the plastic panel (
b
) on the blade
from the hooks (
a
) on the inside of the frame.
2. The new outer foil should be slightly bent and pushed in
until it is hooked in the frame.
•
•