Albatron Technology KI51PV-754 - Manual (Page 12)

Mainboard KI51PV-754
8
FAN Headers: CPUFAN, CHASFAN
There are two fan headers available for cooling fans. The cooling fans play an important role in
maintaining ambient temperatures in your system. The CPUFAN header is attached with a CPU
cooling fan. The CHASFAN header is attached with other cooling fans.
Pin Assignment
1 Ground
2 Power
(+12V)
1
CPUFAN/ CHASFAN
3 FAN RPM rate sense
Memory Installation: DIMM1
The KI51PV-754 provides one DIMM (Dual In-Line Memory Modules) socket. It allows you to
install 184-pin, non-ECC & unbuffered DDR400 (PC3200)/ DDR333 (PC2700) SDRAM that
supports a total memory capacity of 1GB.
Memory Setup Steps:
1. Pull the white plastic tabs at both ends of the socket away.
Attention
You can avoid damaging your CPU due to high temperatures with
proper cooling equipment. It is recommended that attach a cooling fan
on top of your CPU. Use the CPUFAN header to attach the fan cord.
On most fan power cord, the black wire of the fan cable is the “ground”
and should be attached to pin-1 of the header.