Panasonic ESLV65 - Manual (Page 13)

13 TR
R
O
H
SK
CZ
PL
FIN
S
N
P
DK
E
NL
I
F
D
GB
Abnormal charging
The charge status lamp ( ) will blink twice every second.
• After charging is completed, turning the power switch ON
with the shaver plugged in will cause the battery capacity
lamp and the charge status lamp to light up and then turn off
after 5 seconds.
This shows that the shaver is fully charged.
• Recommended ambient temperature for charging is
10 – 35 °C. It may take longer to charge or the battery may
fail to charge properly in extremely high or low temperatures.
Charge the shaver within the recommended ambient
temperature range.
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charge status lamp
( ) may not glow. It will eventually glow if kept connected.
3 3
Disconnect the adaptor after charging is
completed.
• Charging the battery for more than 1 hour will not affect
battery performance.
Note
You cannot operate the shaver while charging.
Using the shaver
1 1
Rotate the lock ring [A7] to unlock the power
switch [A6]. (See page 12.)
2 2
Press the power switch to select the desired
shaving mode.
• Each time you press the power switch, the shaving
mode changes from “Shaving sensor mode” “Normal
mode” “OFF”.
Shaving
mode
Shaving sensor
mode
Normal mode OFF
Description
Beard thickness
is automatically
sensed and the
power is
automatically
adjusted when
shaving.
The power
level is
constantly
maintained
while shaving.
—
Operation
Shaving
sensor lamp
The shaving
sensor lamp
blinks.
—
The shaving
sensor lamp
turns off.
—
The shaving
sensor lamp
turns off.