Agilent Technologies 1100 Series - Manual (Page 26)

A
Upgrading an HP 1100 Series LC
18 Agilent 1100 Series LC Devices Connecting the Hardware and Triggering Data Acquisition Thermo Scientific
2. Follow the instructions in “Installing a Network Card in an Agilent Module” on page 4
to install the JetDirect 400N PCB.
Table 5. Parts required to upgrade an Xcalibur-controlled HP 1100 Series LC
Part Number Description of Part
00825-01140 HP JetDirect 400N PCB
00012-70008 Ethernet 10 Base-T cable (2)
00825-01-00024 Ethernet switch
Note After the communication interface in the HP 1100 LC system is upgraded to
an Ethernet interface, the system is the same as, and will be referred to as, an Agilent
1100 LC system.