Panasonic MCCG695 - Manual (Page 21)

21
Storing
Please perform the following
before storing.
Storage position Park position
Turn off the power.
●
Rewind the mains lead.
●
(Hold the plug to ensure the mains lead
does not jump.)
Store the supplied nozzles.
●
Replacing the dust bag
Please replace a new dust bag
in the following cases:
If the dust bag is not properly
installed, the dust cover will not close.
When the indicator turns red.
●
(Turn the power control to the higest
setting and lift the nozzle off the
floor.)
Suction power has dropped.
●
Caring for your cleaner
If suction power does not return after removing dust…
Check for blockages in hose, telescopic wand, and nozzles. Clean the pre-motor filter.
Cleaning
pre-motor
filter
Remove the dust bag first.
Remove the pre-motor filter and
●
tap to release dust.
Gently wash with water and dry in
●
shade if dust is not easily removed.
Cleaning
nozzle
Using an old toothbrush or similar
●
tool,clean any dirt or lint from the
brush.
Do not wash with water.
●
MC-CG695 • MC-CG691 •
After one year
has passed…
Replace the Exhaust filter.
●
Exhaust filter
(HEPA filter)
To close
●
Attention
Do not use detergent or any other cleaning liquids.
●
Do not wash the pre-motor filter in a washing machine or dry it with a dryer other source of hot air.
●
Attach the pre-motor filter correctly (to avoid damaging motor).
●