Panasonic ESWS20 - Manual (Page 6)

6
Before use
Setting up


This appliance can only be
used for Dry Epilation and is
not rechargeable. It must be
plugged into an electrical
outlet when in use.
1. Plug the adaptor/power
cord into the epilator ( a )
and a household outlet
(
b ).
Changing the head
1
2
1 1 Remove the head while
holding the head release
button.
2 2 Push the head until it
clicks.
Best length of hair for epilation
Trim your hair before epilating for the first time or if you have not
epilated for a long time. Hair removal is easier and less painful
when the hair is short.
<Legs/arms>
2-3mm
NG
OK
Cut your hair to between 2 mm and
 mm long.
You can shave hair leaving the length of
2- mm by using the bikini comb
attached.
Using the bikini comb
Place the bikini comb onto the
shaver head and slide trimmer up.
When the bikini comb is in place, make
sure the comb is in close contact with the
skin. •
Epilating
Before epilating, wipe away water or sweat on your skin.
Also, spread out paper etc. to catch the falling hairs.
Areas suitable for epilation
The epilator can be used on the
areas.
Using the epilator on other areas
may cause pain or skin trouble.
Areas not suitable for epilation
The epilator should not be
used on the inner side of the
upper arms and areas such
as elbows or knees which are
prone to sagging.
1 1 Slide the switch [ E  ] to the 1 (low speed) or 2
(normal speed) position and carry out epilation.