Avocent SwitchView - Manual (Page 25)

Chapter 2: Installation
19 18
SwitchView IP Installer/User Guide Chapter 2: Installation
19
To connect a Sun workstation:
1. Disconnect the local USB keyboard and mouse from the host computer.
NOTE: The Sun workstation dynamically detects any connections and/or disconnections
from the USB ports and uses whichever device(s) was connected last. Before using either
the local or remote keyboard and mouse, first disconnect the device(s) in use and then
connect the new device(s).
2. Obtain a USB A/B cable (not included).
3. Attach the type A connector to the USB port on the Sun workstation.
4. Attach the type B connector to the USB port on the SwitchView IP.