Audiovox FR-1420 - Manual (Page 8)

-8-
Y our FR-1420 requires four “AAA” cells. Alkaline batteries will provide
the best performance from your transceiver.
1.Lift and rotate belt clip counterclockwise (CCW) to the right to access
battery cover.
2.Release battery cover latch and swing latch down; then lift the bottom of
the battery cover and remove from the radio.
3.Insert four “AAA” alkaline batteries. Position batteries according to
polarity markings. Reverse the procedure outlined in step 1 to reas-
semble.
Note : Make sure the battery + and - terminals are aligned as shown.
CHANGING SNAP-ON FACE PLATE
To change the snap-on face plate on the front of the unit, it is necessary to
remove the battery compartment cover and batteries as previously described.
Locate and loosen two screws on the upper part the battery tray.
FACE PLATE
MOUNTING
SCREWS
FACE PLATE
Incorrect battery installation can damage the unit.
Never attempt to charge alkaline batteries with the optional
battery charger. CAUTION: