AT&T MLS-Series - Manual (Page 5)

Calling Features
To use these features on an MLS-18D, MLS-12D, or MLS-12 phone, press the calling feature
button. To use on an MLS-6, MLC-6, MDC 9000, or MDW 9000 phone, press [
Feature ] plus the
2-digit code.
Feature
How to Use
on MLS-6,
MLC-6, MDC 9000,
or MDW 9000
How to Use on
MLS-18D, MLS-12D,
and MLS-12
Description
Privacy
Last Number Press [ Feature ] [ 0 ] [ 5 ] Press [ Last Num ]
Redial
Recall Press [ Feature ] [ 0 ] [ 3 ]
Conference
Drop
Not Available Press [ Privacy ]
Press again to turn off
Press [ Recall ]
Prevents other people with the
same line from joining your
calls. A steady green light next
to [ Privacy ] shows that Privacy
is on.
Redials the last outside num-
ber you dialed. Useful for
redialing a busy number.
“Recalls” a dial tone. If you are
not on a PBX or Centrex, use
Recall to end a call without
hanging up–you will get a dial
tone and can then make
another call. Othenvise, use
Recall to get the PBX/Centrex
dial tone.
Press [ Feature ] [ 0 ] [ 6 ] Press [ Drop ] Drops the last party added to a
conference call.
Auto Dial Numbers
To store an extension number or outside number for one-touch dialing:
1.
2.
3.
4.
5.
Press [ Feature ] [ 0 ] [ 0 ].
Press a programmable Auto Dial button (see p. 3).
Press left [ Intercom ] and dial the extension number, or dial the telephone number up to
20 digits, including special functions, see box below.
(To set up an Auto Dial button for group paging, press [
Intercom ] [ ✶ ] [ 7 ]; for Music
Access, press [ Intercom ] [ 1 ] [ 5 ].)
To store additional Auto Dial numbers, repeat Steps 2 and 3.
Press [ Feature ] [ 0 ] [ 0 ] when you are done.
To insert a... Press...
Pause (1.5 seconds)
[ Hold ]
Recall [ Spkr ]
Stop [ Mic ]
Touch-Tone Enable [ Transfer ]
6