Alpine IVA-D105 - Manual (Page 40)

38
-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
After setting to ON in “Setting the AUX Mode,” this setting can be
carried out.
Setting item: AUX IN LEVEL
Setting content: LOW / HIGH
If a USB Adapter is to be used, set to ON.
Setting item: USB ADAPTER
Setting content: OFF / ON
• If ON is set even when a CD changer is connected, the source name
on the SOURCE select screen will change from CD CHG to USB.
With a rear camera connected, rear view video is output to the monitor.
Setting item: CAMERA IN
Setting contents: OFF / ON
• By shifting to reverse (R), the rear pictures are output.
This function is effective when the reverse wire is properly connected.
• To apply the setting, set to VISUAL “Setting the VISUAL Button”
(page 38).
Outputs the picture/sound of the source selected on the IVA-D105
connected to the rear monitor.
Setting item: AUX OUT
Setting content: OFF / ON
Setting item: Bluetooth IN
Setting contents: NAV. / ADAPTER / OFF
• For details on Bluetooth operation, refer to the Owner's Manual of
the Bluetooth Box.
Setting item: VISUAL KEY
Setting content: VISUAL / NAV.
Setting item: SUBW. OUT
Setting contents: ON / OFF
To connect an audio processor using the optical digital output, set to
“ON” by the following procedure.
Setting item: OPTICAL OUT
Setting contents: OFF / ON
• Afterwards, set ACC to OFF once, then turn it ON again. The setting
of Digital Output is decided.
Adjusting the External Input Audio Level
LOW: Decreases the external input audio level
HIGH: Increases the external input audio level
Setting the USB Adapter to ON/OFF
OFF: Does not display the USB source name on the SOURCE
select screen.
ON: Displays the USB source name on the SOURCE select
screen.
Setting the Rear Camera Input
OFF: The CAMERA source is not displayed on the VISUAL
selection screen.
ON: Even if the shift lever is not set to reverse (R), the rear
pictures are output by selecting the CAMERA source.
Setting the Picture/Sound Output
ON: The “REAR SELECT” item is displayed on the SETUP
select screen.
Touch [
] of REAR SELECT to change to the REAR
select screen, then touch [ ] of the desired source. The
selected source picture/sound is output on the rear
monitor.
OFF: The “REAR SELECT” item is not displayed on the SETUP
select screen.
Setting the Bluetooth Connection
(Bluetooth IN)
NAV.: select when an optional Portable Navigation is
connected.
Change voice line to RCA when TEL rings.
ADAPTER: select when an optional Bluetooth box is
connected.
When external interruption occurs, the display
changes to the TEL screen.
A source name of TEL on the SOURCE selection
screen is displayed.
OFF: Select to ignore any external interrupts.
Setting the VISUAL Button
NAV.: Switches directly to the navigation screen by pressing
VISUAL. (Only when an Alpine optional RGB
Navigation is connected.)
VISUAL: Recalls the VISUAL Select screen by pressing
VISUAL.
Subwoofer On and Off
ON: Subwoofer output is on.
OFF: Subwoofer output is off.
Setting the Digital Output
+01GB00IVAD105.book Page 38 Monday, January 15, 2007 4:02 AM