Audiovox D1210 - Manual (Page 23)

a. Select TV DISPLAY using UP/DOWN, and then press RIGHT
to enter the submenu. Select the TV display mode on the
screen using UP/DOWN, and press ENTER to confirm the
setting. Press LEFT to return.
* NORMAL/PS: When the player is connected to a normal
TV, and a wide picture is shown on the full screen, with a
portion that may be cut off automatically.
* NORMAL/LB: When the player is connected to a normal TV,
and a wide picture is shown on the screen, with black strip
at both top and bottom of the screen.
* WIDE: When the player is connected to a wide screen TV, a
wide picture is shown on the full screen.
b. Select TV TYPE using UP/DOWN, and then press RIGHT to
enter the submenu. Select the TV TYPE mode on the screen
using UP/DOWN, and press ENTER to confirm the setting. Press
LEFT to RETURN.
*NTSC: Select this option when the DVD player is connected to
an NTSC TV.
*PAL: Select this option when tne DVD player is connected to a
PAL TV.
Note: This selection is for DVD Output and not the TV Tuner.
Please note the USA uses NTSC Only . Do not change
unless you know what you are doing.
21