Panasonic DMC-TS25R - Manual (Page 123)

- 123 -
Connecting to other equipment
∫ Installing supplied software
• Before inserting the CD-ROM, close all running applications.
Check the environment of your PC.
• Operating environment of “PHOTOfunSTUDIO 9.0 SE”
– OS:
Windows R XP (32bit) SP3,
Windows Vista R (32bit) SP2,
Windows R 7 (32bit/64bit) or SP1
Windows R 8 (32bit/64bit)
– CPU:
Pentium R III 500 MHz or higher (Windows R XP),
Pentium R III 800 MHz or higher (Windows Vista R ),
Pentium R III 1 GHz or higher (Windows R 7/Windows R 8)
– Display:
1024 k768 pixels or more (1920k1080 pixels or more recommended)
– RAM:
512 MB or more (Windows R XP/Windows Vista R ),
1 GB or more (Windows R 7 32bit/Windows R 8 32bit),
2 GB or more (Windows R 7 64bit/Windows R 8 64bit)
– Free hard disk space:
450 MB or more for installing software
• Refer to the operating instructions of “PHOTOfunSTUDIO ” (PDF) for further operating
environment.
Insert the CD-ROM with the supplied software.
• When you insert the supplied CD-ROM, the install menu will start.
Click on the [Applications] on the install menu.
Click on the [Recommended Installation].
• Proceed with installation according to messages appearing on the screen.
• The software compatible with your PC will be installed.
• “PHOTOfunSTUDIO ” and “LoiLoScope” are not compatible with Mac.