Panasonic KX-TGA106M - Manual (Page 4)

4 For assistance, please visit http://www.panasonic.com/help
Registering a handset to the base unit
1 Handset:
Lift the handset and press {OFF}.
2 Base unit:
Press and hold {LOCATOR} for about 5 seconds until the registration
tone sounds.
L
If all registered handsets start ringing, press the same button to
stop. Then repeat from step 1.
L The next step must be completed within 90 seconds.
3 Handset:
Place the handset on the charger.
L
Continue the operation even when the handset display shows
“
Registering ”.
4 With the handset still on the charger, wait until a long beep sounds
and w stops flashing.
Note:
L If an error tone sounds, or if w is still flashing, register the handset
according to the base unit’s operating instructions.
Display language
1 { MENU} i {#}{1}{1}{0}
2 {V} /{^}: Select the desired setting.
3 Press the middle soft key to save. i {OFF}
TGA106(e).fm Page 4 Monday, January 19, 2009 6:51 PM