Panasonic KX-TS4200B - Manual (Page 27)

Making/Answering Calls
For assistance, please visit http://www.panasonic.com/phonehelp 27
3
Select “Ringer On/Off”, then
press {MENU/SET}.
4
Select the line you want to set, then
press {MENU/SET}.
5
Select the desired setting, then press
{
MENU/SET}.
6
Press and hold {MENU/SET} to
return to standby mode.
Note:
L
To return to the previous menu, press
{ < }
.
Ringer type
Select a ring pattern (4 types) for each
line.
Important:
L
Make sure that the unit is in standby
mode.
1
Press {MENU/SET}.
2
Select “Advanced Setup”, then
press {MENU/SET}.
3
Select “Ringer Type”, then press
{
MENU/SET}.
4
Select the line you want to set, then
press {MENU/SET}.
5
Select the desired setting, then press
{
MENU/SET}.
6
Press and hold {MENU/SET} to
return to standby mode.
Note:
L
To return to the previous menu, press
{ < }
.
L
Incoming intercom calls use Type-1
and cannot be changed.
Turning Do Not Disturb
(DND) on/off
You will not hear call rings or paging
when this feature is activated. The line
indicator flashes for outside calls and the
INTERCOM indicator flashes for
intercom calls.
Press {DND} to turn on/off the Do Not
Disturb (DND) feature.
L
When the Do Not Disturb (DND)
feature is turned on, the DND indicator
lights and the display shows “DND”.
L
When the Do Not Disturb (DND)
feature is turned off, the DND indicator
goes out.
➔Ringer On/Off
Ringer Type
Line Group
[V/^]:Scroll
➔Line1 Ringer
Line2 Ringer
Line3 Ringer
[V/^]:Scroll
Line1 Ringer
=On
[SET]:Save
[V/^]:Change
➔Ringer Type
Line Group
Display MSGW
[V/^]:Scroll
➔Line1 Ring Type
Line2 Ring Type
Line3 Ring Type
[V/^]:Scroll
Line1 Ring Type
=Type-1
[SET]:Save
[V/^]:Change
03:45P 02/23 MON
DND 11
CID:100/198 MSGW
1 34
KXT4200_OI.book Page 27 Friday, September 1, 2006 8:53 AM