Panasonic TC-58AX800U - Manual (Page 47)

- 47 -
About 3D Eyewear
■
Parts name and functions
[Front side] [Back side]
Power button/Mode change/Indicator lamp
Switching the 3D Eyewear on or off.
● Press the button for about 1 second to turn the power on. The indicator
lamp lights for about 2 seconds and then goes off.
● To turn the power off, press the button for 3 seconds or more again.
The indicator lamp flashes 3 times, then the 3D Eyewear turns off
Mode change
● Press the button for about 1 second to change the mode between 3D
and 2D (view a 3D image in 2D).
●
(When power is off) Press the button for 5 seconds to change to
registration mode.
Indicator lamp
● Lights or flashes during use to display the status. (see below)
Protection film
Insulating sheet
● When using for the first time, peel off the protection film and pull the
insulating sheet.
Battery cover
■
Indicator lamp status
Indicator lamp Status
Lights red for 2 seconds when
turned on
Sufficient battery level
Flashes red 5 times when turned on Low battery level
Flashes red
Under registering
Flashes red once every 1 seconds Under reconnecting to the TV