Panasonic NN-CD989S - Manual (Page 24)

24
Operation & Hints
To Use Timer Function
This feature allows you to program the oven as a kitchen
timer. It can also be used to program a standing time after
cooking is completed and/or to program a delay start.
2
Set Desired
Amount of Time
Using Time/Weight Select Dial
(up to 1 hour 30 minutes)
To Use as a Kitchen Timer
3
Press
Time will count down without operating oven.
1
Press Timer
To Set Delay Start
To Set Stand Time
Set Desired
Cooking
Program
Press.
Set desired amount of
stand time.
(up to 1 hour 30 minutes) Press.
Cooking will start.
After cooking, stand
time will count down
without oven operating.
Press. Set desired amount of
delayed time.
(up to 1 hour 30 minutes)
Press.
Delay time will count
down. Then cooking
will start.
Set Desired
Cooking
Program
NOTE:
1. When each stage finishes, a two-beep signal sounds. At the end of the program, the oven will beep five
times.
2. If the oven door is opened during Stand Time, Kitchen Timer or Delay Time, the time on the display will
continue to count down.
3. Stand time and Delay start cannot be programmed before any automatic Function. This is to prevent the
starting temperature of food from rising before defrosting or cooking begins. A change in starting
temperature could cause inaccurate results.
4. Timer can be set up to 1 hour 30 minutes.