Panasonic HC-W850K - Manual

Wi-Fi Connection Guide
High Definition Video Camera
Model No. HC-W850/HC-V750
HC-V550/HC-V250
SQC0011
It is required to install the “Image App” on your smartphone/tablet to connect this unit.
1
[Android ™ ]: Select “Google Play™ Store”.
[iOS]: Select “App Store SM ”.
2
Enter “Panasonic Image App” into the search box.
3
Select “Panasonic Image App” and install it.
This unit cannot be used to connect to a public wireless LAN
connection.
Step.1 Install the “Image App” on your smartphone/tablet
Step.2 Confirm the Wi-Fi ® connection method
Step.3 Connect to Wi-Fi
ENGLISH
To use the Wi-Fi ® function, it is required to connect this unit to a wireless access point or smartphone via Wi-Fi.
≥ This guide explains the [Link to Cell] function with the use of a Wi-Fi connection.
A [Link to Cell]
B [Baby Monitor]
C [Home Cam]
D [History]
E [DLNA Play]
F [Copy]
G [Live Cast]
H [Wi-Fi Setup]
≥ Please refer to the owner’s manual (PDF
format) of this unit for details about the
setup/operation of this unit.
≥ Please refer to the operating instructions of
the device in use for details about the setup/
operation of the wireless access point or
smartphone.
Step.1 Install the “Image App” on your smartphone/tablet
An environment that can connect to the network is required.
   
   
Step.2 Confirm the Wi-Fi ® connection method
Confirm the wireless access point and smartphone used.
When connecting to a wireless
access point (wireless LAN router)
When connecting to a smartphone
1
Check if the wireless access point is compatible with
IEEE802.11b/g/n.
≥ Proceed to step 2 once the compatibility is confirmed.
2
Check if the wireless access point is compatible with
WPS*.
Compatible with WPS:
Proceed to A [WPS Connection] of Step.3
Not compatible with WPS:
Proceed to B [Search for wireless network] of Step.3
* WPS is an abbreviation for Wi-Fi Protected Setup™.
Proceed to C [Direct Connection] of Step.3
≥ Android and Google Play are trademarks or registered trademarks of Google Inc.
≥ App Store is a service mark of Apple Inc.
≥ “Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi Alliance.
≥ QR Code is a registered trademark of DENSO WAVE INCORPORATED.
A [WPS Connection]
1
Press the Wi-Fi button on this unit to setup the Wi-Fi.
2
Touch a Blank row to register a new
wireless network.
3
Touch [WPS Connection].
4
Press the WPS button on the
wireless access point.
≥ When the connection is complete, a message is displayed on this
unit.
5
Touch [Link to Cell] and start up the
smartphone application “Image App”.
≥ When the connection is complete, images from this unit are
displayed on the smartphone screen.
B [Search for wireless network]
≥ Please refer to the operating instruction of the device in use for details
about the setting and display of the wireless access point.
1
Press the Wi-Fi button on this unit to setup the Wi-Fi.
2
Touch a Blank row to register a new
wireless network.
3
Touch [Search for wireless
network].
≥ For more details about [Manual Setting], please
refer to the owner’s manual (PDF format) of this
unit.
4
Touch the wireless access point to connect.
≥ Touch [ENTER].
≥ If an Encryption key (Password) is not set on your router, the connection is
complete and a message is displayed.
5
(When there is an Encryption key (Password))
Enter the Encryption key (Password) of the wireless
access point.
≥ For details on how to enter characters, refer to the owner’s manual (PDF
format).
≥ When the entry is complete, touch [Enter].
6
Touch [Link to Cell] and start up the smartphone
application “Image App”.
≥ When the connection is complete, images from this unit are displayed on
the smartphone screen.
C [Direct Connection]
1
Press the Wi-Fi button on this unit to setup the Wi-Fi.
2
Touch [Change connection type] and select [QR code].
≥ The QR code is displayed on this unit screen.
3
Start up the smartphone application “Image App”.
4
On the smartphone, select [QR code], and scan the QR
code displayed on the screen of this unit.
≥ When using an iOS device, perform the following operations:
1 Select the option that allows you to install the app on the profile
screen of the “Image App“, and follow the on-screen instructions to
complete the installation.
2 Press the home button to close the displayed screen.
3 After selecting the network name (SSID) of this unit from the Wi-Fi setup
of the smartphone, start up “Image App“.
≥ When the connection is complete, images from this unit are displayed on
the smartphone screen.
This function can be used with the NFC compatible device with Android (OS
version 2.3.3 or later). (Except for some models)
NFC is an abbreviation for Near Field Communication.
≥ When this unit and the smartphone are connected to the same wireless
access point, the result is a wireless access point connection. All others
are direct connections.
1
Start up the smartphone application “Image App”.
2
Touch the smartphone on of this unit when a
message to touch the NFC mark of the device is
displayed on the smartphone screen.
≥ Touch [YES] on the screen of this unit, and proceed with the connection by
following the smartphone screen instructions.
≥ When the connection is complete, images from this unit are displayed on
the smartphone screen.
≥ The NFC function cannot be used on the smartphone when a message to
touch the NFC mark of the device is not displayed. Try other connection
methods.
Step.3
Connect to Wi-Fi
When connecting to a wireless
access point (wireless LAN router)
[Wi-Fi Setup] # [Wireless Settings]
[Wi-Fi Setup] # [Wireless Settings]
 
A [Delete]
B [ENTER]
 
A [Delete]
B [ENTER]
When connecting to a smartphone
[Wi-Fi Setup] # [Direct Connection]
Connect with using NFC
SQC0011~Wi-FiGuide_mst.fm 1 ページ ２０１３年１１月３０日 土曜日 午後１時４３分