Slave mode, Cautions for use, Specifications – Panasonic DMW-FL360L User Manual

Page 16

Advertising
background image

VQT4Q07 (ENG)

16

∫

MANUAL

Choose the guide number.

1 Set the flash mode to [MANUAL].

“Flash Mode” (P10)

2 Match the zoom position to the focal length

of the lens.

“[ZOOM]” (P11)

3 Set the guide number.

“Other Settings” (P13)

Slave Mode

The flash can be fired remotely in sync with any flash fired by other units.

1 Set the flash mode to [SL AUTO] or [SL

MANUAL].

“Flash Mode” (P10)
Adjust other flash settings as for [AUTO] or [MANUAL] mode.
“Camera without Communication Functions” (P15)

2 Position the flash.

Flash positioning method is same as the wireless mode.
“Placing Wireless Flash Units” (P12)
Refer to the camera operating instructions for details about
the flash positioning range.
• Set the flash mode of the camera to the manual which

does not fire the pre-flash. If the camera fires the pre-
flash, the external flash synchronizes with the pre-flash of
the camera, and cannot fire the flash light properly.

• The flash may fire in response to flash units used by other

photographers.

Cautions for Use

∫

About the unit

Do not carry the unit when it is still attached to the camera body.

∫

About the batteries

Be sure to remove the batteries when you will not be using the unit for a long
period of time.

Specifications

Specifications are subject to change without notice.

Power requirements:

DC 6.0 V

VQT4Q07_PP_E_GK.book 16 ページ 2012年10月23日 火曜日 午前9時39分

Advertising