Panasonic TC-50AS650UE - Manual (Page 16)

- 16 -
Watching TV
Cable / Satellite / Fiber Optic box
Initial setting
1. Connecting
Select the wiring method connecting your box to the TV, AV IN or
Antenna/Cable in.
Note:
● HDMI will provide the best HD picture
2. Change INPUT
INPUT
Press the INPUT button to select the proper connection. Wait for 2
seconds.
●
The menu choices vary depending on which input is selected.
3. Power on your Cable, Satellite or Fiber Optic box
Use the box’s remote control to change channels.
●
If the box is connected to the TV using a COAX cable (Antenna/Cable
in), then set the TV channel to CH3 or CH4. Note that the picture will not
be in HD.
● CC/SAP is not available when watching TV with a Cable or Satellite box
connected via HDMI.
● If you have a High Definition box, ensure that it is outputting 720p or
1080i signal.
Tip: press the TV’s
INFO button to verify.
● Check your box’s “aspect” or “format” settings. It should be set to 16:9,
Widescreen or Full.
● If the audio volume is too low, check the box’s audio settings.
●
Contact your Cable or Satellite provider for instructions on any box
settings.