Attaching/detaching the lens – Panasonic H-NS043 User Manual

Page 7

Advertising
background image

7

(ENG) VQT5E43

≥ When flash recording with a close subject, the

light of the flash will be blocked by the lens and
part of the picture may be dark. Check the
distance from the subject when recording.

≥ Operating sounds may be recorded when auto-

focusing during motion picture recording. If
operating sounds become bothersome, we
recommend setting to manual focus (MF) and fixing
focus before recording to avoid recording the lens
noise.

≥ If you set the [O.I.S.] to [ON] when recording a motion

picture, operating sounds may be recorded. If they
become bothersome, we recommend setting the [O.I.S.]
switch to [OFF] and mounting the camera on a tripod.

≥ The aperture can be adjusted with the aperture

ring only when a Panasonic digital camera is
attached to the lens. (As of January 2014)

Attaching/Detaching the Lens

Check that the camera is
turned off.
≥ Remove the lens rear cap

from the lens.

∫ Attaching the Lens

Align the lens fitting marks

A on the camera body and

the lens and then rotate the

lens in the direction of the

arrow until it clicks.

• Do not press the lens

release button B when

you attach a lens.

• Do not try to attach the lens when holding it at an angle to

the camera body as the lens mount may get scratched.

• Check that the lens is attached correctly.

• Be sure to remove the lens cap when recording.

∫ Detaching the Lens

While pressing on the

lens release button B,

rotate the lens toward

the arrow until it stops

and then remove.

• Attach the lens rear cap so

that the lens contact point

does not get scratched.

• Attach the body cap to the camera so no dirt or

dust will get inside the main unit.

VQT5E43_ENG_SPA.book 7 ページ 2013年12月25日 水曜日 午後7時41分

Advertising
This manual is related to the following products: