Panasonic FV-08VF2 - Manual (Page 9)

Fig. 11
Fig. 10
Fig. 9
When mounting
body and blower
separately
1. Loosen 4 screws (but
do not remove them
from blower). (Fig. 12-1)
2. Remove blower section.
(Fig. 12-2)
4. Insert fan body (without
blower section) into
joists. (Fig. 9)
5. Secure the adaptor to
fan body by using thumb
screw. (Fig. 10)
7. Insert the blower into the
fan body. (Fig. 12-3)
3. Remove adaptor from fan
body and secure it to
joists as in Fig. 8 of
page 8.
9
Make sure that adaptor claws are properly inserted
into body slots.
IMPORTANT:
5. Insert the fan body into joists. (Fig. 9)
6. Open the orifice cover, secure the fan body to
adaptor by using thumb screw and plug connector
to receptacle (Fig. 10)
7. Secure to joists by using
long screws(M4X30) and secure it to fan body by
using screw
(M4X10) in vertical direction (Fig. 11)
the suspension bracket
II
8. Follow steps 8 to 9 of Installation (page 8) to
complete the installation work.
I
6. Secure the fan body
to joists by using long
screw(M4X30) (Fig. 11)
8. Secure the blower.
(Fig. 12-4) and plug
connector to receptacle
(Fig. 10)
Fan body
Blower
Fan body
Ceiling joist
Adaptor 4-Screws
Screw driver 4-Screws
Slots
Adaptor
claws
Fan body
Joist
Conduit
Junction box cover
Circular duct
Duct tape
Fig. 12-2
Fig. 12-3
Fig. 12-1
Fig. 12-4
Thumb
screw
Plug connector
Receptacle
Screw (M4X10) II
2-Long screws
(M4X30)