Panasonic SC-PMX9 User Manual

Cd stereo system, Wi-fi, Connection guide

Advertising
background image

   

CD Stereo System

Model No. SC-PMX9

You can wirelessly stream music from an iOS device, an Android

TM

device or a

Mac/PC to SC-PMX9’s speakers. To use this music-streaming feature,
SC-PMX9 must join the same 2.4 GHz wireless network as the compatible device
through the wireless network router (access point).

≥ For information on how to connect with a LAN cable, refer to “Wired LAN connection” in the Owner's Manual.

*1: Refer to the Operating Instructions for the compatibility.
Screen images used in this sheet : iPhone 4S, iOS 6.0.1

Wi-Fi

®

connection guide

iOS device

*1

, Android device

or Mac/PC

Wireless network

router

SC-PMX9

VQC9787

Yes

No / Do not know

No

Yes

Start wireless network settings

Preparation
1
Place SC-PMX9 close to the wireless network router as

possible and then point the antenna on the rear of the main
unit up as shown in the figure.

≥ Do not tilting the antenna forward or backwards when it is pointing up.

2 Connect the AC power supply cord while the LAN cable is disconnected.
3
Turn this system on.
4
Follow the chart below to choose the network setting method.

≥ If you want to perform wireless setting with your Mac/PC, or you want to apply the advanced

setting, refer to

“Method 4”

in the Owner's Manual.

You can make the wireless network
settings with the app, “Panasonic
Stereo System Network Setup” (for
free).
If you’re using an Android device,
download the app at Google Play

TM

. If

you’re using an iPod touch/iPhone/
iPad, download it at the App Store.

Preparation
≥ Connect your smartphone to your

home wireless network.

≥ Check the password for your home

wireless network.

Note for the iOS version

After step 3
1 Enter the password for the home

wireless network to which the iOS
device is connected.

2 When a message instructing you

to connect the iOS device to this
system is displayed, press the
home button.

3 On the Wi-Fi network selection

screen in “Settings”, select
“00 Setup _ _ _ _ _ _”.

4 When a message indicating the

completion of the connection to
this system is displayed, restart
the app.

5 When a message indicating the

completion of the Wi-Fi setup of
this system is displayed, close the
app, and then check the operation
of AirPlay, etc.

1

Press [SETUP] on the remote

control repeatedly to select

“Net Setup” and then press [OK].

“With iPod” is indicated on the display.

2

Press [SETUP] on the remote

control repeatedly to select

“Manual” and then press [OK].

3

Start “Panasonic Stereo System

Network Setup” on your

smartphone and follow the

indications.

Using AirPlay

The following explanations are based on an iPhone.

≥ AirPlay, iPad, iPhone, and iPod touch are trademarks of Apple Inc.,

registered in the U.S. and other countries.
Lightning is a trademark of Apple Inc.

≥ App Store is a service mark of Apple Inc.
≥ Android and Google Play are trademarks of Google Inc.
≥ The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi

Alliance.

≥ The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
≥ “Wi-Fi” and “Wi-Fi Protected Setup” are marks or registered marks

of the Wi-Fi Alliance.

≥ All other trademarks are trademarks of their respective owners.

If you have any questions, visit:

U.S.A.: www.panasonic.com/support
Canada: www.panasonic.ca/english/support

1

Connect the iPhone to your home wireless network.

2

Select “Panasonic PMX9 _ _ _ _ _ _” from the AirPlay

icon and start play.

“Settings”

“Wi-Fi”

Turn on

Your home wireless
network name
(SSID)*

3

*3: You may be prompted for the password. Enter the password of your home wireless network.

   

   

“Music”

“Panasonic PMX9 _ _ _ _ _ _”

Play starts.
(with a slight delay)

Does your wireless network router support

WPS (Wi-Fi Protected Setup

TM

)?

Are you using an iPod touch/iPhone/iPad?

Is the iOS version 5.0 or later?

Method 1

Method 2

Method 3

1

Press [SETUP] on the remote

control repeatedly to select

“Net Setup” and then press [OK].

“With iPod” is indicated on the display.

2

Press [SETUP] on the remote

control repeatedly to select “WPS

Push” and then press [OK].

“WPS” flashes on the display.

3

Press the WPS button on the

wireless network router.

4

Press [OK] on the remote control

to exit.

*

2

The settings are completed when
“Success” is displayed and “

” is

indicated on the display.

*2 : The marking may differ.

The following explanations are based on an iPhone.

Lightning connector compatible iPod
touch/iPhone:

iPod touch/iPhone/iPad with
iOS 5.0 or later:

1

Disconnect iPod/iPhone/iPad

connected to the main unit.

2

Connect the iPhone to your home

wireless network.

3

Connect the iPhone to the main unit.

Choose one of the following

connections.

iPad

Dedicated cable supplied with the

iOS

device

4

Press [SETUP] on the remote

control repeatedly to select

“Net Setup” and then press [OK].

“With iPod” is indicated on the display.

5

Unlock your iPhone and then

press [OK] on the remote control.

6

A message will pop-up on the

iPhone. Allow the iPhone to share

the wireless network settings.

7

The settings are completed when
“Success” is displayed and “

is indicated on the display.

8

Press [OK] on the remote control

to exit.

VQC9787_mst.fm 2 ページ 2014年3月3日 月曜日 午後7時3分

Advertising