Panasonic SC-XH105 - Manual (Page 11)

11 VQT5J81
B
asi
c o
p
erati
o
n
s
“HDMI CEC”
This unit supports “HDMI CEC” (Consumer
Electronics Control) function.
See the owner’s manual for connected equipment
for operational details.
Preparation
Set “HDMI CEC” to “On” (
> 13).
(The default setting is “On”.)
When the unit starts playback, the TV will
automatically turn on and the screen of the unit
will be displayed.
All connected “HDMI CEC” equipment
automatically turns off when you switch the TV off.
Playing music continuously even after turning
off the TV
Select “Video” in “Power Off Link” ( > 13)
≥ The operation cannot be guaranteed on all HDMI CEC
equipment.
Listening to the Radio
You can preset up to 30 channels.
1
Press [RADIO].
Select a radio broadcast
2
Press [ 3] or [4] to select the frequency.
≥ [3]: Next frequency /
[ 4]: Previous frequency
≥ Press [2], [1] to start automatic tuning.
Tuning stops when a station is found.
To preset the channel
3
Press [PGM].
4
Press [ :] or [9] to select a channel
number.
5
Press [OK].
1
Press [RADIO].
2
Press the number buttons to select the
channel.
e.g., 01: [0] B [1].
12: [1] B [2].
Alternatively, press [ :] or [9].
1
Press [RADIO].
2
Press and hold [PGM].
≥ “ErASE” is flashing on the unit’s display.
3
Press [OK].
Power on link
Power Off Link
Tuning and presetting
Listening to a preset
channel
To erase all the preset
channels
RADIO
PR 01
SC-XH105P-VQT5J81_mst.book 11 ページ ２０１４年３月２０日 木曜日 午前１１時５分