Panasonic MC-GG529 - Manual (Page 18)

- 18 -
Tool Storage
➢ Place wand in center slot of tool
holder, twisting and pushing down
over short hose to assure a good
connection.
➢ Place crevice tool into rectangular
rear slot of tool holder.
➢ Refer to PARTS IDENTIFICATION
section for tool location.
Wand
Tube
Tubo
Dusting Brush
Brosse à
épousseter
Cepillo para
sacudir
Crevice Tool
Suceur plat
Herramienta
para hendiduras
Short Hose
Manguera
corta
Tuyau court
Hose Holder
Soporte para
la Manguera
Porte-tuyau
“J" Slot
Fente en “J”
Ranura en "J” Raised Tab
Saillie
Lengüeta
levantada
Wand
Tube
Tubo
Hose
Tuyau
Manguera
➢ Place hose in front of handle on
hose holder.
➢ Attach wand to hose by aligning the
two (2) raised tabs on wand with “J”
slots in hose, guide tabs along
grooves, twist to lock in place.