Panasonic TC-50AS650UE - Manual (Page 19)

18 English
● Complete first time setup
Completion screen is displayed.
3
Select type of Home Screen
The “Tutorial” for “my Home Screen” starts.
Follow the instruction of the “Tutorial” to select desired
“Home Screen”.
Example: Home Screen Selection
Example: Lifestyle Screen
• “Home Screen” is displayed as the start-up screen
when the TV is turned on or the HOME button is
pressed.
First Time Setup
The first time setup screen is displayed only when the
TV is turned on for the first time, after the power cord is
inserted into a wall outlet.
1
Turn the TV on with the POWER
button
(TV)
or
(Remote)
2
Setup the following items
● Select your language
● Select your country
● Select your viewing mode
(Be sure to select “Home Use”)
If you select “Store Demonstration” by mistake,
confirmation screen will be displayed.
To display the “Set viewing mode” screen again
in order to select “Home Use”, perform one of the
following actions:
• Press and hold down the rear POWER button for
at least five seconds.
• Unplug the power cord for 30 seconds and then
plug it in again.
● Configure Network connection
Follow the instructions on screen to complete the
Network connection.
● ANT/Cable setup
Set up based on how your TV programming is
connected. Select “Yes” if you are connected to a
Cable, Satellite or Fiber Optic box. Select “No” if you
are connected to the Antenna/Cable In with a coaxial
wire into the screw-on connector. In this case you will
need to scan for channels that are available in your
area.
● Adjust the Clock
Select the clock mode and adjust other settings.
When “Auto” is selected, clock will be set
automatically according to Time zone and DST. The
TV must be connected to the Internet to use this
feature.