Operations, Using this system, Preparation – Panasonic SC-HTB8 User Manual

Page 15

Advertising
background image

Getting started

Operations

VQT5J41

15

Precautions

Operations

Using this system

Preparation

≥ Turn on the TV and/or connected device.

Press [Í] to turn on the main unit.

Select the source.

≥ This remote control cannot be used to control the operations

of the connected devices.

When “ ” is selected as the source

On the Bluetooth

®

device:

Select this system as the output source of the
connected Bluetooth

®

device and start the

playback.

When “BD/DVD” is selected as the

source

On the TV and the connected device:
Select the TV’s input for this system and start the
playback on the connected device.

To adjust the volume of this system

Press [i VOL j].

≥ Volume range: 0 to 100

§

To set the surround mode

You can enable/disable the surround effect.

Press [SURROUND].

≥ To cancel, press the button again.

To set the clear voice mode

With the clear voice mode you can hear dialogs clearer.

Press [CLEAR VOICE].

≥ To cancel, press the button again.

To mute the sound

Press [MUTE].

≥ While muting, all the indicators blink simultaneously.
≥ To cancel, press the button again or adjust the volume.
≥ Muting is canceled if the main unit is turned off.

§ BD/DVD indicator, Bluetooth

®

indicator and sound mode indicators blink from left to right (i) or from right to left (s) while adjusting.

The indicators will not blink when it has reached the maximum or minimum.

≥ If there is sound coming out of the TV’s speakers, reduce the volume of the TV to its minimum.
≥ If the main unit is turned off with the volume setting in the greater half (above 50), the main unit will automatically

lower the volume to the middle (50) when the main unit is turned on (Volume limitation).
To turn this function off, refer to page 16.

Press

To select

[INPUT]

“TV”

--------------# “BD/DVD”

^--- “ ” (Bluetooth

®

)

!-}

[ ]

“ ” (Bluetooth

®

)

CLEAR VOICE

SURROUND

PAIRING

----

INPUT

If this system does not operate as expected or sound is unusual, returning the settings to the
factory preset may solve the problem. (
> p. 17)

SC-HTB8P_VQT5J41_P.book 15 ページ 2014年3月24日 月曜日 午前10時35分

Advertising