Panasonic ES2207P - Manual (Page 4)

4 5
Our research has shown that you can enjoy closer and smoother shaves
with the three floating heads and sharp blades. And our pop-up trimmer will
be able to cut longer hairs with ease. Treat yourself to wet lather shaves for
at least three weeks and notice the difference.
Cleaning is so simple. Just rinse out the shaving head under the tap or
shower. No mess, no fuss!
Charge the shaver for at least 1 hours before using it for the first time or
when it has not been in use for more than six months.
Parts identification
A Protective cap
B
Outer foil
C
Trimmer
D Pop-up trimmer switch
E Outer foil frame
F
Outer foil frame release button
G
Inner blade
H On/Off switch
I
Charging indicator lamp
J
Charging stand










Before use
Charging
Charge the shaver fully for 1 hours before using it for the first time, when it
seems to be losing speed, or when it has not been used for an extended
period. If not used regularly, the shaver should be recharged every six
months to preserve battery life.
Charging once a week is recommended.
A full charge will supply enough power for about 7 shaves (three minutes
per shave).
Turn the shaver off and set it firmly into the charging stand. Keep the stand
level. Plug into an AC outlet.
The charge indicator lamp will glow and it will stay on until the charging
stand is removed from the AC outlet.
Using
Using your shaver
Remove the protective cap and apply shaving lather
generously. For the best results, move the shaver in back and
forth directions, while keeping the shaver head at a right
angle (90°) to your skin so that the two trimmers and outer
foil work together at the same time. Slide the pop-up trimmer
switch up when using the pop-up trimmer to cut long hairs.
1
Underarm
Hold your arm up enough to stretch your
skin and shave back and forth.
2
Legs
Be sure to move the shaver from ankle to
knee.
3 Arms
Be sure to move the shaver from outside to
inside.
4 Bikini
It is recommended to use the pop-up
trimmer for proper shave.
 
 
Cleaning
Cleaning
For cleanliness and convenience, we
recommend that you clean your shaver
with water and a liquid hand soap. Regular
cleaning will keep your shaver in good
condition while preventing odors or
bacteria from developing, and maintain the
cutting performance.
With the outer foil in place, apply some
hand soap onto the outer foil.
Turn the shaver on and turn off after few seconds.
Next, press the outer foil frame release buttons to remove the outer foil
4-5 2007/10/25 15:34:13