Panasonic SH-FX67 - Manual (Page 5)

5
Setup
5
RQ
TX
01
25
ENG
L
IS
H
Setup
Preparation
≥ Turn off all equipment before connection and read the appropriate
operating instructions.
≥Connect the AC power supply cord after all other connections are
complete.
[Note[
≥ Do not use the wireless system and digital transmitter in a metal cabinet
or bookshelf.
≥ Do not attempt to connect any extra surround speakers to the home
theater unit.
≥ Place the wireless system within approximately 10 m (33 ft) from the
home theater unit.
∫ Wireless setup diagram
e.g. 5.1ch
[Compatible model: e.g. SC-PT660, SC-PT754]
LS: Surround (left), RS: Surround (right)
≥ Place on the side of or slightly behind the seating position.
e.g. 7.1ch (Using two units of the wireless system)
[Compatible model: e.g. SC-BT100]
This placement offers 7.1-channel playback. Your home theater unit must
be capable of 7.1-channel playback.
LS: Surround (left), RS: Surround (right)
≥Place on the side of the seating position.
LB: Surround back (left), RB: Surround back (right)
≥Place behind the seating position, about 1 meter (3 ft) higher than ear
level.
(Continued on next page)
LS RS
Surround speaker cables (included)
Surround speakers are not included.
Wireless system
Home theater unit
(with the digital
transmitter)
Seating position
LS
LB RB RS
Surround speaker cables (included)
Surround speakers and surround back speakers are not included.
Wireless system
Home theater unit
(with the digital
transmitter)
Seating position
Wireless system
SH-FX67_RQTX0125_En_111207.fm Page 5 Tuesday, December 11, 2007 7:52 AM