Setting up the massage lounger, Where to use the unit – Panasonic EP-MA73KU User Manual

Page 13

Advertising
background image

EN14

1

Where to use the unit

Ensure there is adequate space to recline.

Do not expose the massage lounger to direct sunlight or high temperatures, such as in front of

heating sources, because this can cause discoloration or hardening of the synthetic leather.

Place the unit on a mat to prevent floor damage. When placing a mat under the unit, the size of

the mat should be sufficient (at least 120 cm × 70 cm (47.2 in. × 27.6 in.)) to cover the areas

where the unit touches and where the leg rest could touch the floor, as shown in the diagram

on the above.

Install the unit near a power outlet.

For details on the dimensions of the unit, see
page EN9.

Area where leg rest

could touch the floor

Area where unit

touches the floor

Mat

Keep at least 10 cm (3.9 in.) away from the wall.

Approx. 202 cm (79.5 in.)

Approx. 30 cm

(11.8 in.)

Width approx.

90 cm (35.4 in.)

Approx. 49 cm

(19.3 in.)

Setting up the massage lounger

Main unit

Accessories

Armrests (Right/Left)

Right/Left indication

(Back of the armrest)

Controller

4 mm

(Cross-section)

●

Allen key — 1

This is initially inserted

in the lock switch of the

power switch section

prior to leaving the

factory.

Lock switch key

●

Attachment screws
(M6 × 13) — Black


(M6 × 20) — Silver

●

Comfort
cushion

●

Power cord

Pillow

Controller stand

Controller

holder

(2 pcs.)

(4 pcs.)

Controller

holder fixing

screw
Clip

The holes in the fabric
at the back of the
hand & arm massage
section are due to
the manufacturing
process and are not a
fault.

2

Confirm that the main unit and the accessories are in the box.

EP-MA73_EN.indb 14

2014-4-24 10:24:02

Advertising