Panasonic TC-50A400U - Manual (Page 9)

Setting Up the TV
9
English
and
and
trol.
ine
d
r
aged,
e
l will
ight
ury
e
ed
and
lt.
1
Assemble the pedestal
2
1
2
Attach the TV to the pedestal
2
1
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the
TV.
1
Remove the assembly screws from the TV.
2 Pull out the pedestal from the TV.
3 Remove the assembly screws from the bracket.
Wall mounting the TV (optional)
Please contact a professional installer to purchase
the recommended UL qualified wall-hanging bracket.
For additional details, please refer to the wall-hanging
bracket installation manual.
b
Rear of the TV
Screw for fixing the TV onto the wall-hanging
bracket (not supplied)
Depth of
screw
(View from the side)
a
■
Holes for wall-hanging bracket installation
a: 15.8” (400 mm)
b: 7.9” (200 mm)
■
Screw specification
Type
Depth of screw
Minimum
Maximum
M6 0.40” (10 mm) 1.10” (28 mm)
Warning
● Always be sure to ask a qualified technician to carry
out set-up.
● Do not mount the unit directly below ceiling lights
(such as spotlights, floodlights or halogen lights) that
typically give off high heat. Doing so may warp or
damage plastic cabinet parts.
● Take care when fixing wall brackets to the wall.
Always ensure that there are no electrical cables or
pipes in the wall before hanging bracket.
● To prevent fall and injury, remove the TV from its
fixed wall position when it is no longer in use.
● Incorrect wall-hanging bracket or incorrect fitting
may cause equipment to fall, resulting in injury and
product damage.
● Panasonic disclaims liability for any damage or injury
arising from incorrect wall-hanging bracket, incorrect
fitting or otherwise failure to follow the above
instructions.
TC-50A400U_EN.indd 9 TC-50A400U_EN.indd 9 3/17/2014 4:13:08 PM 3/17/2014 4:13:08 PM