Before requesting service, Warning – Panasonic MC-UG223 User Manual
Page 36
- 36 -
BEFORE REQUESTING SERVICE
Review this chart to find do-it-yourself solutions for minor performance
problems. Any service needed, other than those described in these
Operating Instructions, should be performed by an authorized service
representative.
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Vacuum cleaner
1. Unplugged at wall outlet.
1. Plug in firmly. Push ON-OFF
will not run.
switch to On.
2. ON-OFF switch not turned on.
2. Push ON-OFF switch to ON.
3. Tripped circuit breaker/blown
3. Reset circuit breaker or replace
fuse at household service panel.
fuse.
Poor job of dirt
1. Full or clogged dust bag.
1. Change bag.
pickup.
2. Broken belt.
2. Replace belt.
3. Clogged hose or nozzle.
3. Clean hose or nozzle area.
4. Hose not inserted fully.
4. Insert hose.
5. Worn agitator.
5. Replace agitator.
6. Dust cover improperly installed.
6. Properly install dust cover.
Dust escapes
1. Bag improperly installed.
1. Properly install bag.
the paper bag.
2. Bag torn.
2. Replace bag.
WARNING
Electrical Shock or Personal Injury Hazard
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.