Sensors (compass/altimeter/barometer) are operated – Panasonic DMC-TS5D User Manual

Page 24

Advertising
background image

VQT4T99 (ENG)

24

Sensors (compass/altimeter/barometer)
are operated

The direction, altitude, and atmospheric pressure can be measured and recorded in the
recorded images.

Information measured on this unit is only a rough indication. Do not use it for
technical purposes.

When using this unit for full-scale mountain climbing, trekking, or underwater, use the
measured information (direction, altitude, depth, atmospheric pressure) only as a
rough indication, and always carry a map and purpose-built measurement tools.

Press [MENU/SET].

Press 3/4/2/1 to select [GPS/Sensor] menu, and then press
[MENU/SET].

Press 3/4 to select [Sensor Settings], and then press [MENU/
SET].

Press 3/4 to select [ON], and then
press [MENU/SET].

Exit the menu after it is set.

To switch the environment information
screen, press [DISP.] several times.

A Compass

16 bearings are measured based on the direction the lens of the camera is pointing in.

The colored portion of the compass needle points north.

B Altimeter

You can check the altitude of the current location.

Displaying range is j600 m (–2000 feet) to 9000 m (30000 feet).

C Barometer

With the current atmospheric pressure as a reference, it is displayed on the graph within
the range of j10 hPa to _10 hPa.
(Atmospheric pressure out of range cannot be displayed in details)

10

0ft

00' 00' 00.00

1013hPa

-24H

0

H

000' 00' 00.00

GPS

5

0

-5

-10

N
E

N

N

10:00 DEC.1.2013

10:00 DEC.1

B

C

A

DMC-FT5&TS5P-VQT4T99_eng.book 24 ページ 2013年1月7日 月曜日 午後2時53分

Advertising