Panasonic MC-UG728 - Manual (Page 16)

- 16 -
Screw
Vis
Tornillo
Carry Handle
Poignée de
transport
Soporte para
transportar
Handle
Manche
Mango
➢ Slide the carry handle to the
position shown in the illustration.
➢ Re-install the screw through the
carry handle into the hole in the
handle.
➢ Tighten screw. Do not overtighten.
Screw
Vis
Tornillo
Clip
Loquet
Clip
➢ Slide the clip to the position shown
in the illustration.
➢ Re-install the screw through the clip
into the hole in the handle.
➢ Tighten screw. Do not overtighten.
MC-UG729 MC-UG728
➢ See the complete handle assembly
shown in the illustration.